Bow Quiver Guide: Types and How to Choose the Right One
Every quiver style compared, the features that matter for hunting, and how to set one up so it stays silent.
Better Outdoors is reader-supported. When you buy through our Amazon links we may earn a commission, at no extra cost to you. Learn more.
Key Takeaways
- A bow quiver mounts directly to the riser, so your arrows travel with the bow. It is the most common choice for compound bowhunters.
- For hunting, look for a full broadhead hood, grippers that fit your arrow diameter, and a quick-detach mount so you can take the quiver off in the stand.
- Hip quivers suit target and 3D shooting, back quivers suit traditional archers, and quiver-on vs quiver-off changes how your bow balances.
- Sight in and practice the way you will hunt. If the quiver stays on when you shoot, keep it on in practice.
- Keep broadheads covered at all times, and check your state’s rules on transporting and carrying hunting arrows.
A bow quiver is a rack that bolts to the side of your bow’s riser and holds a handful of arrows, usually three to seven, with the points tucked under a protective hood. For most compound bowhunters it is the simplest, quietest way to carry arrows, because everything you need moves as one unit and your hands stay free.
Not every archer needs one, though. Target shooters, 3D competitors and traditional archers often prefer quivers worn on the body. This Better Outdoors guide explains every quiver type, what to look for in a hunting quiver, how a quiver affects accuracy, and how to set one up so it stays silent when a deer is close.
Try the free Bowhunting Gear ChecklistTick-off pack list for treestand, blind and backcountry.What Is a Bow Quiver?
A bow-mounted quiver has three main parts:
- The hood at the top: a hard cup lined with foam or rubber. Broadhead or field point tips push into it, which keeps blades covered and arrows from sliding.
- The gripper lower down: a rubber or polymer clip with slots that pinch each arrow shaft and hold it in place.
- The mount and frame: a bracket that attaches to your riser, usually through the sight-mount holes or a dedicated quiver mount, and a frame that connects hood and gripper.
Most hunting quivers can be removed from the bracket in seconds. That matters, because many bowhunters take the quiver off once they are settled in a stand or blind and hang it on a hook, then shoot with a lighter, better-balanced bow.
Types of Archery Quivers Compared
Before you buy a quiver, it helps to see how it compares with the other main styles. Each one solves a different problem.
| Quiver type | Where it rides | Typical capacity | Best for | Main drawback |
|---|---|---|---|---|
| Bow-mounted (one-piece) | Mounted on the riser | 3 to 7 arrows | Most compound bowhunting | Adds weight to one side of the bow |
| Bow-mounted (two-piece) | Hood and gripper clip on separately | 3 to 5 arrows | Traditional bows and minimalist setups | Usually stays on the bow; less quick to remove |
| Hip quiver | Belt or clip at your side | 3 or more tubes, many arrows | Target, 3D and field ranges | Noisy and snaggy in thick cover |
| Back quiver | Over the shoulder | Many arrows | Traditional archery and stalking open ground | Arrows can rattle and catch on branches |
| Side or pocket quiver | On a belt, hanging near the hip | Several arrows | Spot-and-stalk hunters who want a light bow | Takes practice to draw arrows quietly |
| Ground or stand quiver | Stuck in the ground or hung on a tree | Varies | Practice sessions and blind setups | Not portable while moving |
One-Piece vs Two-Piece Bow Quivers
A one-piece quiver has the hood and gripper joined by a single frame, with one mount on the riser. This is the style you see on most compound bows, and most one-piece designs detach quickly. A two-piece quiver mounts the hood and gripper separately, often clamped to the limbs of a recurve or longbow. Two-piece designs are popular with traditional archers because they are light and sit close to the bow, but they generally stay on full time.
Hip and Back Quivers
Hip quivers hang from a belt and usually have three or four tubes so you can sort arrows by number or point type. They are a favorite at the range because they hold plenty of arrows plus pockets for an Allen key, a scorecard and a release. A popular example is the Easton Flipside 3-Tube Hip Quiver, which the listing describes as working for left- or right-handed shooters. Back quivers are the classic traditional choice. They carry a lot of arrows and look great, but they can catch brush and rattle when you walk.
Do You Need a Bow Quiver for Hunting?
You do not strictly need one, but a bow-mounted quiver is the default for good reasons:
- Arrows are always with the bow, so a follow-up shot is close at hand.
- The hood keeps broadhead blades covered while you walk, climb or crawl.
- There is nothing on your belt or back to snag on brush or treestand straps.
- It travels in a bow case as part of one tidy package.
The tradeoff is weight and balance. A loaded quiver adds weight to one side of the riser, which can make the bow want to tip during the shot. Many hunters handle this by removing the quiver once they are set up, or by adding a stabilizer or side bar to counter it. If you hunt from the ground and move a lot, keeping the quiver on is usually more practical.
How to Choose a Bow Quiver
These are the features worth comparing when you shop for a hunting quiver.
Hood Depth and Broadhead Fit
The hood must fully cover your broadheads. Large fixed-blade heads and some mechanical heads need a deeper hood than field points. Check that the blades sit completely inside the foam with no edge exposed. A hood with replaceable foam is helpful, because foam gets chewed up after a few seasons of pushing broadheads into it.
Gripper Size and Arrow Diameter
Grippers are designed for a range of shaft diameters. Many modern hunting arrows are very thin, and an older gripper may not hold them tightly. A loose gripper lets arrows rattle, which is noise you do not want. If you shoot small-diameter shafts, look for a quiver that says it fits them, or buy replacement grippers sized to your arrows. Arrow choice affects more than the quiver: our guide on how heavy your arrow should be covers weight and spine.
Capacity: How Many Arrows?
Most hunting quivers hold four to six arrows. More arrows mean more weight on the bow, so it is commonly advised to carry only what you need. Many whitetail hunters carry three to five. Elk and spot-and-stalk hunters covering more ground sometimes carry a few more. A compact four-arrow design such as the G5 Head-Loc Air Quiet Low-Profile 4-Arrow Quiver keeps the profile slim.
Mounting and Quick Detach
Check how the quiver attaches to your bow. Many mount to the two sight-mount holes on the riser; some bows have their own integrated quiver mount. A good quick-detach bracket lets you pull the quiver off with one hand and lock it back on without rattling. Look for a mount that lets you adjust the quiver up, down and in toward the riser, so it clears your cams, cables and sight.
Weight, Noise and Finish
Lighter frames reduce the balance problem, and rubber-coated or vibration-dampening parts help keep the bow quiet at the shot. A camo or matte black finish avoids shine. Pay attention to anything that can rattle: loose screws, a wobbly bracket or arrows that touch each other.
Quivers worth a look
Trophy Ridge 5-Spot Arrow Quiver
A widely used bow-mounted quiver for compound bows, sold in black.
- Bow-mounted design
- Large number of reviews
G5 Head-Loc Air Quiet 4-Arrow Quiver
A low-profile, four-arrow hunting quiver with an Exo-Flex hood.
- Low profile
- Built for quiet carry
Trophy Ridge Hex Light Arrow Quiver
A lightweight bow-mounted quiver option from Trophy Ridge.
- Light frame
- Bow-mounted
Easton Flipside 3-Tube Hip Quiver
A three-tube hip quiver for the range, listed for left- or right-handed archers.
- Three tubes
- Left or right hand
TOPARCHERY Leather Back Quiver
A traditional shoulder back quiver in leather with a large pouch.
- Traditional look
- Large pouch
KESHES Archery Back Arrow Quiver
An adjustable budget quiver with a shoulder strap and belt clip.
- Back or belt carry
- Budget friendly
As an Amazon Associate, Better Outdoors earns from qualifying purchases.
How to Install a Quiver on Your Bow
Every quiver comes with its own instructions, so follow those first. The general process for a one-piece, quick-detach quiver looks like this:
- Remove all arrows and broadheads from the area. Never fit a quiver to a bow with a nocked arrow.
- Attach the bracket to the riser using the supplied screws, usually in the sight-mount holes or the bow’s quiver mount. Snug them, but do not overtighten into the riser.
- Clip the quiver onto the bracket and check that it locks firmly with no play.
- Adjust the height so the hood clears the top cam and the bottom of the arrows clears the lower cam and your hand.
- Load arrows with field points first and draw the bow slowly. Confirm nothing touches the string, cables or sight.
- Shoot a few arrows and listen for buzzing or rattles. Tighten anything loose and add a dab of thread-locker to screws if the manufacturer allows it.
Once the quiver is on, recheck your sight. A small shift in balance can move your groups. Our guide on how to sight in a compound bow walks through setting and confirming your pins.
Quiver On or Off? Accuracy and Balance
This is one of the most debated topics in bowhunting. There is no single right answer, but here is how the two approaches compare:
- Quiver on: the bow is always ready and you never forget your arrows. The extra weight on one side can cause the bow to lean, so watch your sight bubble and keep your grip relaxed.
- Quiver off: the bow balances better and some archers feel steadier. You need a safe place to hang the quiver within reach, and you need to sight in with it off.
If you go quiver-on, mount it as close to the riser as it will go and keep arrow count consistent. If you go quiver-off, practice reaching for a second arrow from wherever the quiver will hang, so the motion is smooth and quiet. Not sure your bow fits you in the first place? Our bow finder quiz and draw length calculator help you start with the right setup.
Quiver Safety and the Law
Broadheads are razor sharp, and most archery cuts happen while handling arrows, not shooting them. Follow these rules every time:
- Keep broadheads covered in the hood whenever arrows are not on the string.
- Hoist the bow unloaded into a treestand with a haul rope, quiver attached and arrows secured, and wear a full-body harness connected to the tree from the moment you leave the ground. See our treestand bowhunting tips for more.
- Confirm broadhead flight. Practice with your broadheads before the season to make sure they hit with your field points, then switch to a dedicated practice head so hunting blades stay sharp.
- Check local rules. Some states have rules on transporting archery equipment, carrying arrows in vehicles or near roads, and the types of broadheads and lighted nocks you can use. Always confirm your state’s regulations and licensing before you hunt.
Good arrow handling is only half of a clean hunt. Shot selection matters even more; our deer shot placement guide explains where to aim and which shots to pass on.
Quiet Quiver Tips for Hunting
A hunting quiver should be silent. A few small habits help:
- Fill every slot you plan to use, and space arrows so fletchings do not touch.
- Replace hood foam when broadheads no longer seat firmly.
- Swap worn grippers before the season. They wear out faster than the frame does.
- Check the quick-detach latch for play, and add a thin strip of moleskin where metal meets metal.
- Shake the bow gently at home. Anything that rattles there will rattle in the woods.
If you are building a full kit, our bowhunting checklist covers everything from release to rangefinder. Shopping for a new bow with a quiver already included? Many packages in our guide to ready-to-hunt bow packages come with a quiver, sight and rest installed. You can also see how much speed your setup produces with our arrow speed calculator.
Choosing the Right Quiver for You
For most compound bowhunters, a quick-detach bow quiver with a deep hood and grippers that fit your arrows is the right place to start. Target and 3D shooters will be happier with a hip quiver, and traditional archers can pick between a two-piece bow-mounted quiver and a back quiver based on how they hunt. Whatever you choose, keep it quiet, keep broadheads covered, and practice exactly the way you plan to hunt.
Frequently Asked Questions
What is a bow quiver used for?
A bow quiver holds arrows directly on the bow, usually three to seven, with the points covered by a hood. It keeps arrows close at hand for a follow-up shot and frees you from carrying arrows on your belt or back.
Does a bow quiver affect accuracy?
It can. A loaded quiver adds weight to one side of the bow, which can make it lean slightly. The key is consistency: sight in and practice with the quiver set up exactly as you will hunt, either on or off.
Should I take my bow quiver off when hunting?
Many treestand and blind hunters remove the quiver once settled and hang it within reach, because the bow balances better. Ground hunters who move often usually leave it on. Both work if you practice the same way you hunt.
How many arrows should a hunting quiver hold?
Most hunting bow quivers hold four to six arrows. Many whitetail hunters carry three to five, which is usually enough for a day while keeping weight down.
Will any bow quiver fit my bow?
Most quivers mount through the sight-mount holes found on many compound risers, but some bows use a dedicated quiver mount. Check the quiver listing and your bow manual for compatibility, and make sure the grippers fit your arrow diameter.
What is the difference between a hip quiver and a bow quiver?
A hip quiver hangs from your belt and usually holds more arrows in tubes, which suits target and 3D shooting. A bow quiver attaches to the riser and is designed for hunting, with a hood that covers broadheads.


